Li-PCB tsa tšepe tse ngata

PCB ea tšepe e fetang ea tšepe e ngata ke e 'ngoe ea karolo ea bohlokoahali ea sehlahisoa se khethehileng sa taolo ea indasteri. Re shebile indastering ea PCB le PCBA ka lilemo tse fetang 10, 'me haholo-holo e ileng ea sebeletsa Mabarakeng Europe le Amerika Boroa le boroa-bochabela ho Asia.Re ts'epa ho u thusa ho hlahisa lihlahisoa tsa boleng ba tlholisano 'marakeng oa lehae.

Lintlha tsa sehlahisoa

Li-tag tsa lihlahisoa

Boholo bo fetangIron Metal Core Pcb

1.Renturestion eaBoholo bo fetangIron Metal Core Pcb

Lipotoloho tsa Fasteline li khona ho fana ka lisebelisoa tse felletseng tsa turger le turway tse nang le bothata ba ho ba teng tsa Botoro tsa Botoro bo Botala. Bakeng sa Turnke e felletseng, re hlokomela ts'ebetso eohle, ho kenyelletsa ho hlophisoa ha liboto, lisebelisoa tsa potoloho, odara ea marang-rang ea ho lekola kopano ea boleng le ea ho qetela. Lethe bakeng sa phetoho e itseng, moreki a ka fana ka li-PCB le likarolo tse itseng, 'me likarolo tse setseng li tla tšoaroa ke rona.

Libaka - Molemong oa Rona

1. O fetang lilemo tse 10 a fumana moetsi oa PCB
2. Sekepe se seholo sa ho hlahisa hoa etsa bonnete ba hore litšenyehelo tsa hau tsa theko li tlase.
3. Mohala o tsoetseng pele o tiisa hore na nako e telele ea bophelo e tsitsitse le ea bophelo ba nako e telele.
4. E hlahise ka mokhoa o mong le o mong oa ho tseba.
5. Teko ea 100% bakeng sa lihlahisoa tsohle tsa PCB tse khethiloeng.
6. Tšebeletso e emisa ka ho lekana, re ka thusa ho reka likarolo.

Core ea tšepeMotlatsi oa PCB

FastlineMetal Core Pcb ea tšepeBokhoni
Lisebelisoa Aluminium, koporo
Palo e phahameng ea lager Likarolo tse 4
Boholo ba phanele 17 "x 23" (432 x 584 mm2)
Min. Botenya ba boto 1.0mm al, 4 mils (0.1 mm) fr4
Copper clad (kahare) 1/2 oz, 1 oz, 2 oz, 3 oz
Copper Clad (kantle) 1/2 oz, 1 oz, 2 oz, 3 oz
Bokaholimo ba metsi Entek 106a, qoeli-qoelisetsoang khauta, han, ho silikisetsa silevera
Leske ea Maske Lpi: taiyo psr 4000, Tamura Ds2200, mohlomong 77ma
Bonyane trace (bophara) 12.0 mils (0,30 mm)
Bonyane Trace (Space) 12.0 mils (0,30 mm)
Bonyane ho na-to-pad Tol. ± 3 Mils (± 0.76 mm)
Holeloa ho lla haholo (NPth) ± 2 Mils (± 0.05 mm)
Holeloa ho lla ka mokhoa oa hole (leq) ± 3 mils (± 0.076 mm)
Boholo ba lesoba la sekoti 20 Mils (0,50 mm)
Lehola le bolela tol. <± 10 mils (0.25 mm)
Bohloeki ba Ionic <5 mg / ka2 ea Nacl (0.775 mg / cm2)
Taolo e Imapeloang ± 10% (e fapaneng)
Parpage <1%

Lihlahisoa3306 (1)

Lihlahisoa3306 (2)

PCB Prototype lead:

Ntho

Nako e akaretsang

Ho fetoha kapele

Likarolo tse 1-2

Matsatsi a 4

Matsatsi a 1

Likarolo tse 4-6

Matsatsi a 6

Matsatsi a 2

Likarolo tse 8-10

Matsatsi a 8

Matsatsi a 3

12-16 Likarolo

Matsatsi a 12

Matsatsi a 4

Likarolo tsa 18-20

Matsatsi a 14

Matsatsi a 5

Libaka tse 22-26

Matsatsi a 16

Matsatsi a 6
Hlokomela:

Bula ka data eohle e fumanoang ke rona 'me e tlameha ho ba e felletseng le e se nang mathata, nako ea lead e se e loketse ho tsamaea.

Re lumela hore boleng ke moea oa khoebo ebile o fana ka litšebeletso tse tsoetseng pele tsa boenjiniere le tsa ho etsa lihlahisoa tsa indasteri ea elektroniki.
Boleng ba molumo bo fumana botumo bo botle ba ho itšireletsa pele. Bareki ba tšepahalang ba kile ba sebelisana le rona khafetsa 'me ba bareki ba bacha ba ipeha lebitso la tšebeliso ea bolumeli ha ba utloa ka botumo bo boholo. Re lebelletse ho fana ka ts'ebeletso ea boleng bo holimo ho uena!

Lintlha tsa 2production tsa tšepe e ngataMetal Core Pcb ea tšepe

Li-cop Pcb ea tšepe e ngata (2)

Li-PCB tsa tšepe tse ngata

3.Kopo OfLi-PCB tsa tšepe tse ngata

Re sebelitse Pcroba ea boleng bo holimo ho linaha tse ngata, ho tsoa ho electronics ea bareki ho isa tekolo, matla a macha, aerospace, appsotive, jj.

Lihlahisoa4128

Sehlahisoa sa elektroniki

Lihlahisoa4137

Indasteri ea Commuso

Lihlahisoa4133

Aerospace

Lihlahisoa4225

Taolo ea indasteri

Lihlahisoa4231

Programmer ea likoloi

Lihlahisoa4234

Indasteri ea sesole

4. TLHOKOMELISO EALi-PCB tsa tšepe tse ngata

Re behile lefapha le arohaneng moo moralo oa tlhahiso o khethehileng o tla latela tlhahiso ea hau ea odara kamora tefo ea hau, ho fihlela tlhahiso ea hau ea PCB ea PCB ea PCB.
Re na le boleng bo tlase ba ho paka Pcba ea rona.

Lihlahisoa4627

Ho Etela 1 Etela
Lihlahisoa4649

Troup ea 6.OUR

Re sebelisa Vacuum le Carton ho ea thatela thepa, ho etsa bonnete ba hore kaofela ba ka u fihlela ka botlalo.

Lihlahisoa4757

7.deaver le ho sebeletsa
U ka khetha k'hamphani efe kapa efe ea ho bontša hore u na le ak'haonte ea hau, kapa ak'haonte ea rona, bakeng sa sephutheloana sa boima, thepa ea leoatleng e tla ba teng.

 Lihlahisoa4929 Lihlahisoa4928

Lihlahisoa4932

Ha u fumana pcba, u se ke oa lebala ho li hlahloba le ho li leka,
Haeba bothata bofe kapa bofe, ba amohela ho ikopanya le rona!

8.faq
Q1: Na u fektheri kapa k'hamphani ea khoebo?
A1: Re na le tlhahiso ea rona ea tlhahiso ea PCB

Q2: Palo ea hau ea taelo e tlase ke efe?
A2: Moq oa rona ha o tšoane ho latela lintho tse fapaneng. Litladi tse nyane le tsona lia amoheleha.

Q3: Ke file eo re lokelang ho e fana ka faele?
A3: PCB: Faele ea Gerber e betere, (Protel, File PCB, File File), PPBA: FEELA: FEELA: FEELA: Gerber file.

Q4: Ha ho faele ea faele ea pcb, feela e na le sampole ea pcb feela, na u ka e nkela eona?
A4: E, re ka u thusa ho koala pcb. Romella feela mohlala oa mohlala ho rona, re ka koala moralo oa PCB mme re sebetse.

Q5: Ke tlhaiso-leseling efe kapa efe e lokelang ho fanoa ntle le file?
A5: Ho na le litlhaloso tse latelang tsa mantsoe:
a) Lintho tse iqapetsoeng
b) botenya ba boto:
c) botenya ba koporo
d) Phekolo ea bokaholimo:
e) 'mala oa maske oa lesela le signkreen
f) bongata

Q6: Ke khotsofetse haholo ha ke bala tlhahisoleseling ea hau, nka qala ho reka odara ea ka joang?
A6: Ka kopo ikopanye le thekiso ea rona lapeng la lapeng, kea leboha!

Q7: Lipehelo tsa ho tsamaisoa ke eng?
A7: Hangata re sebelisa lipehelo tsa fob ebe re kenya thepa ka la 7-15 Workves ho latela bongata ba odara ea hau, tloaelo.