• I. PCB Control Specification

• 1. PCB kwancewa da ajiya (1) PCB allon shãfe haske da unbupped za a iya kai tsaye amfani da online a cikin 2 months na masana'antu kwanan wata (2) The PCB hukumar masana'antu kwanan wata ne a cikin 2 months, da kuma unpacking kwanan wata dole ne a alama bayan kwancewa.(3) PCB kwamitin kera kwanan wata yana cikin watanni 2, bayan cirewa, dole ne ya kasance akan layi kuma a yi amfani dashi cikin kwanaki 5.
  2. PCB Postcure
• (1) Idan PCB an rufe kuma an cire shi fiye da kwanaki 5 a cikin watanni 2 na kwanan wata masana'anta, da fatan za a aika a 120 ± 5 ° C na awa 1(2) Idan PCB ya fi watanni 2 daga ranar masana'anta, da fatan za a sanya shi a 120 ± 5 ° C na awa 1 kafin zuwa kan layi.
  (3) Idan PCB ya wuce watanni 2 zuwa 6 da kwanan watan masana'anta, da fatan za a aika a 120 ± 5 ° C na awanni 2 kafin zuwa kan layi
  (4) Idan PCB ya kasance watanni 6 zuwa shekara 1 da suka wuce kwanan wata masana'anta, da fatan za a ajiye shi a 120 ± 5 ° C na awanni 4 kafin zuwa kan layi
  (5) Dole ne a yi amfani da PCB ɗin da aka gasa a cikin kwanaki 5 (a saka a cikin IR REFLOW), kuma dole ne a sanya PCB ɗin na tsawon sa'a ɗaya kafin a iya amfani da shi akan layi.
  (6) Idan PCB ya fi shekara ɗaya daga ranar masana'anta, da fatan za a ajiye shi a 120 ± 5°C na tsawon awanni 4 kafin a fara kan layi, sannan a aika zuwa masana'antar PCB don sake fesa tin kafin a fara kan layi.3. Hanyar postcure PCB(1) Manyan PCBs ( PORTs 16 da sama, gami da PORTs 16) ana ajiye su a kwance, tarin har guda 30, a bude tanda cikin mintuna 10 bayan an gama yin gasa, sai a fitar da PCB, sannan a sanyaya shi a kwance (bukatar). don danna anti-plate bay fixture)

  (2) Ƙananan PCBs masu girma da matsakaici (ciki har da 8PORTs ƙasa da 8PORT) ana sanya su a kwance. Matsakaicin adadin tari shine guda 40. Adadin nau'in tsaye ba shi da iyaka. Bude tanda kuma fitar da PCB a cikin mintuna 10 bayan an gama aikin. Banwan fixture)

II. Kiyayewa da ajiyewa na PCBs a yankuna daban-daban
Ƙayyadadden lokacin ajiya da zafin jiki na PCB ba kawai suna da alaƙa da ƙarfin samarwa da tsarin samarwa na masana'antun PCB ba, har ma suna da kyakkyawar dangantaka da yankin.

PCB da tsarin OSP ya yi da tsantsar zinari mai nutsewa gabaɗaya yana da tsawon rayuwar watanni 6 bayan marufi, kuma gabaɗaya ba a ba da shawarar yin gasa don tsarin OSP ba.

Lokacin adanawa da yin burodi na PCB yana da alaƙa da yankin. A kudu, gabaɗaya zafi yana da nauyi, musamman a Guangdong da Guangxi. A watan Maris da Afrilu na kowace shekara, za a sami yanayin "komowa kudu", wanda ke da gajimare da ruwan sama a kowace rana. Ci gaba, yana da ɗanɗano sosai a wannan lokacin. PCB da aka fallasa zuwa iska dole ne a yi amfani da shi a cikin sa'o'i 24, in ba haka ba yana da sauƙi don oxidize. Bayan budewa na al'ada, yana da kyau a yi amfani da shi a cikin sa'o'i 8. Ga wasu PCBs da ake buƙatar toya, lokacin yin burodi zai fi tsayi. A cikin yankunan arewa, yanayin gabaɗaya ya bushe, lokacin ajiyar PCB zai yi tsayi, kuma lokacin yin burodi na iya zama guntu. Yawan zafin jiki na yin burodi shine 120 ± 5 ℃, kuma an ƙayyade lokacin yin burodi bisa ga takamaiman halin da ake ciki.